Save Up to 75% Discount with today's Handpicked Deals.

Shop

Sale!

Heavy Duty Petrol Power Generator

£299.00 £149.00

Compare

In stock

Share this

This SGS dual voltage, heavy duty petrol generator provides a reliable, efficient source of portable electrical backup or standby power for light trade, DIY, leisure and home users alike!

The power is delivered from a reliable 3.0 HP petrol engine with an easy-start recoil mechanism and low oil level alert. A 5 litre fuel tank gives approximately 7 hours of run time at 100% load. A circuit breaker is fitted to protect against overload and an AVR to sense and maintain a constant voltage as the load on the generator varies.

It’s also built into a sturdy, neat and economical all-steel frame to protect the generators components as well as provide useful lifting and securing point.

Tips on ordering the correct generator:
It is recommended to leave 20-25% headroom when ordering a generator. So a 1000W heater should be run on a 1200W generator, to help extend the life of the generator.

Resistive and inductive loads:
A generator can be used for two types of loads – resistive and inductive. A resistive load has no moving parts and no start-up power requirement – for example kettles, light bulbs and heaters. An inductive load applies to most items with a moving part – for example motors, air compressors, power washers, drills and hoovers. Items with an inductive load require three times their rated wattage at start-up. So a 1000W hoover/vacuum would need up to 3000W at start-up.

 

• Powerful motor
• Air-cooled
• High-quality design
• Starter cord
• Voltmeter
• 1x230V AC power EURO Plug outlets
• 1x12V DC power outlet
• Low-oil sensor
Motor
Motor type 4-stroke petrol motor, air-cooled
Capacity 80 ccm
Motor output 3.0 HP / 2.2 kW
Fuel Unleaded petrol
Tank capacity 5 litres
Oil capacity 0,4 litres
Operating time 6-7 hours
Loudness (7m) 63 dB
Spec sheet
Continuous power 900W
Max. power 1000W
Output voltage 230V power outlet (max.) 1000W
Nominal voltage (AC) 230 V / 50 Hz
Direct current (DC) 12V (max. 9,1A)
Nominal current 9,1 A / 1
Dimensions (L x W x H) 460 x 360 x 375 mm
Weight 23 kg
SKU: PWG3

Reviews

Write a review

There are no reviews yet.

Product page custom tab content. You can change it in theme admin panel.