You can’t put a price on the health and safety of your family, but a deal like this certainly helps. This carbon monoxide and gas detector has an incredibly simple interface, with a green LED light flashing to indicate that the device is functioning properly and a red light to warn you of any detection.
Should the gas reach dangerous levels, a loud alarm sound will blare to ensure that there’s no way you can miss it. Sleek, compact and designed with your wellbeing in mind, this is one gadget you’ll want to grab before it goes up in smoke!
- Permanent carbon monoxide sensor
- The alarm sound pattern is four short alarm beeps. The red LED will flash while in the alarm mode.
- One chirp every 30 seconds in an indication that the battery is low (need replacement) (green LED still flashes once every 30 seconds).
- Test/Reset button to test the unit electronics and verifies proper unit operation and reset the unit during CO alarm.
- Alarm memory feature: If the unit ever alarms, pressing the button, green LED will flashes once every second for one minute and the peak alarm level will be indicated on the LCD.
- Green and red LED lights that indicate normal operation and alarm status.
- The unit will sound chirp and red LED flashes once as power up.
- Green LED: Flashes every 30 seconds to indicate the unit is operating properly. The green LED will also flash before CO reading is taken and when any button is pressed.
- Red LED: When a dangerous level of carbon monoxide is detected the red LED will pulse and a loud alarm pattern will sound.
The carbon monoxide alarm pattern is 4 short beeps, followed by 5 seconds of silence, followed by 4 short beeps with a corresponding red LED flash. This cycle will continue for 4 minutes and then change to 1 cycle every minute until the device is reset or the CO is eliminated.
2 x Carbon Monoxide Alarm
2 x Set of Screws
2 x User Manual
Required 3 AA Batteries (not included)
Product page custom tab content. You can change it in theme admin panel.